Brand guide
Tesla Wall Connector (Tesla wall charger) installation in New Zealand
The Tesla wall charger (Wall Connector) charges any Type 2 EV, not just Teslas, and it's one of the cheaper smart home chargers in NZ. Here's the spec, indicative price, and what installing one involves.
In short
The Tesla Wall Connector (the Tesla wall charger most NZ homes mean by 'Tesla home charger') is a 7kW smart Type 2 unit that works with most EVs, not just Teslas. It's listed around NZ$850 unit-only, one of the cheaper smart chargers here, with a straightforward install landing in the usual $1,500–$2,500 all-in range.
The Tesla Wall Connector, often just called the Tesla wall charger, is one of the most popular home chargers in New Zealand, and a common surprise is that it isn’t Tesla-only. The current generation sold here (Gen 3, 7.3m cable) uses the standard Type 2 connector and charges most EVs, often at a lower unit price than comparable smart chargers (Tesla NZ shop, verified June 2026). This guide covers what it offers and how it fits a typical install.
What the Tesla Wall Connector is
A wall-mounted AC charger with a long 7.3m tethered Type 2 cable, built-in Wi-Fi, and power-sharing across multiple units. Despite the brand name, Tesla states it’s “compatible with most electric vehicles”, so a non-Tesla household can use it just as well (Tesla support NZ, verified June 2026).
Tesla Wall Connector specs at a glance
| Spec | Gen 3 Wall Connector |
|---|---|
| Max power | up to 7.4 kW single-phase (32 A) / up to 11 kW three-phase (16 A), subject to supply, installer setup and your car’s onboard AC limit |
| Connector | Type 2, tethered (7.3 m cable) |
| Works with | Tesla and most other Type 2 EVs |
| Wi-Fi | Built-in, but optional; charges offline without it |
| Power sharing | Up to 6 units share one circuit |
| App / account | Set up and monitored via the Tesla app |
| IP rating | IP55 (indoor/outdoor) |
| Warranty | 4 years (residential) |
Specs from Tesla NZ (shop, support), verified June 2026.
What a Tesla Wall Connector costs
Unlike most brands here, Tesla lists its price openly: the Gen 3 Wall Connector (7.3m) is about NZ$850 unit-only on the official Tesla NZ shop (shop.tesla.com, verified June 2026; indicative, so reconfirm the live price before buying). That’s a competitive hardware price; the install on top follows the usual drivers in the EV charger installation cost guide.
One buying caveat: Tesla’s NZ shop currently restricts the Wall Connector purchase to verified Tesla vehicle owners (you sign in with the account your car is registered to), even though the hardware itself works with most EVs. If you don’t own a Tesla, confirm current availability with Tesla or buy a comparable Type 2 charger through your installer (Tesla support NZ, verified June 2026).
Tesla Wall Connector vs other smart chargers
Against the other smart Type 2 chargers commonly sold in New Zealand, the Wall Connector’s pitch is a long tethered cable, built-in power sharing, and an openly listed, relatively low unit price.
- vs Wallbox: the Wallbox Pulsar range is one of the most compact units on the market and comes in socketed or tethered versions; the Tesla unit counters with a longer 7.3m cable and power sharing across up to six chargers on one circuit.
- vs Evnex: Evnex is New Zealand-designed and locally supported, with strong load management and app features; the Tesla unit is usually cheaper on hardware but leans on the Tesla app ecosystem.
- Smart features generally: scheduling, solar diversion and dynamic load management vary a lot by brand. If those features matter to you, weigh them up with the smart EV charger guide before committing to hardware.
The speed question is separate from the brand question, and most homes are well served by 7kW either way (7kW vs 22kW).
Where the Tesla Wall Connector fits
It suits buyers who want a sleek, well-priced charger that works with any EV, and especially two-EV households, thanks to power sharing across up to six units on one circuit. The long 7.3m cable gives flexibility on mounting position relative to where the car parks, and the optional Wi-Fi means you can keep it simple (offline charging) or add app scheduling and updates later. You don’t need to own a Tesla, and you don’t need Wi-Fi for it to charge.
The install basics (the same for any charger)
A home charger is fixed electrical work: a Registered Electrician installs it on a dedicated, RCD/RCBO-protected circuit and issues a Certificate of Compliance on completion. A Registered Electrician must do the work; if you buy through Tesla, check Tesla’s current installer requirements before booking. Most NZ homes are single-phase, where around 7kW is the norm.
A straightforward install typically lands in the **$1,500–$2,500 all-in** range; the
[full cost guide](/ev-charger-installation-cost-nz/) explains what pushes it higher:
usually a long cable run or a switchboard upgrade. Frequently asked questions
Can I use the Tesla Wall Connector to charge a non-Tesla EV?
Yes. The Wall Connector sold in NZ uses the standard Type 2 connector and Tesla states it's compatible with most electric vehicles, not just Teslas. Any Type 2 EV (BYD, Kia, Hyundai, MG and the rest) can charge on it. Your charging speed depends on your car's onboard AC charger and your home's supply.
Do I need Wi-Fi to use the Tesla Wall Connector?
No. Wi-Fi is optional: the Wall Connector charges offline without it. Connecting it to Wi-Fi via the Tesla app adds scheduling, usage data and firmware updates, but basic charging works whether or not it's online.
Can two EVs share one Wall Connector circuit?
Yes. Up to six Wall Connectors can power-share on a single circuit, automatically distributing the available load between them. That makes it a strong option for two-EV households or anyone planning a second car, without needing a separate circuit per charger.
How much does a Tesla Wall Connector cost in NZ?
The Gen 3 Wall Connector (7.3m cable) is listed on the official Tesla NZ shop at around NZ$850 unit-only (indicative; reconfirm the live price before buying). That's competitive against comparable smart Type 2 chargers. A standard install on top still lands in the usual $1,500–$2,500 all-in range.
Is the Tesla Wall Connector worth it?
For many NZ homes, yes. At around NZ$850 unit-only it's one of the cheaper smart Type 2 chargers, it works with most EVs (not just Teslas), and the long 7.3m cable plus power sharing across up to six units make it flexible for two-EV households. The main catch is that Tesla's NZ shop currently restricts the purchase to verified Tesla owners. If you don't own a Tesla, confirm availability or buy a comparable charger through your installer.
How long is the Tesla Wall Connector cable?
The Gen 3 Wall Connector sold in NZ has a 7.3m tethered Type 2 cable, longer than many rival home chargers, which gives you more freedom in where the unit is mounted relative to where the car parks. It removes the need to carry a separate portable cable for home charging.