Brand guide
Wallbox home charger installation in New Zealand
A Wallbox Pulsar Plus runs about $1,380–$1,695 for the unit, and a full NZ install typically lands at $1,500–$2,500 all-in. Compare the Pulsar range, see what drives the price up, and get free quotes from Registered Electricians.
In short
A Wallbox charger (the compact Pulsar range) costs around $1,380–$1,695 unit-only for the Pulsar Plus, and a full Wallbox installation cost in NZ typically lands in the usual $1,500–$2,500 all-in range including the unit, and a long cable run or a switchboard upgrade is what pushes it higher. Figures are indicative, not quotes.
Wallbox is a Barcelona-founded EV-charging specialist whose Pulsar range is widely stocked in New Zealand. Its calling card is size: the Pulsar Plus is one of the most compact tethered 7kW units on the market, roughly 166 × 163 × 82 mm and about a kilogram (evc.co.nz, verified June 2026). This guide covers the Wallbox models sold here, indicative pricing, and how one fits a typical install.
Wallbox models sold in New Zealand
- Pulsar Plus: the mainstream home charger and the volume seller in NZ. 7.4kW single-phase, tethered, controlled through the Wallbox app.
- Pulsar Max, the newer-generation successor: easier to install, more weather- and dust-hardened for indoor or outdoor use, with added voice control and a faster processor.
- Pulsar Pro: the higher-power/socketed variant in the family (up to 22kW), less commonly stocked for typical NZ homes.
Wallbox Pulsar Plus specs at a glance
| Spec | Pulsar Plus |
|---|---|
| Max power | 7.4 kW single-phase |
| Connector | Type 2 (Type 1 option) |
| Cable | Tethered, 5 m (7 m optional) |
| App / portal | Wallbox app + Portal |
| OCPP | OCPP 1.6j |
| Load management | Dynamic load management + solar charging |
| Size / weight | 166 × 163 × 82 mm, ~1 kg |
| IP / impact rating | IP54 / IK08 |
| Warranty | 3 years |
Specs from NZ retailer listings (evc.co.nz, wallbox.com NZ), verified June 2026.
Wallbox installation cost in NZ
Separating hardware from the install: indicative unit-only pricing is around $1,380–$1,695 for the Pulsar Plus and ~$1,995 for the Pulsar Max (incl GST; HRV, evc.co.nz, verified June 2026; indicative, promo-dependent, not quotes). Some installers advertise fitted packages around $2,100. For what drives the install side, see the EV charger installation cost guide.
Where Wallbox fits
Wallbox suits buyers who want a compact, unobtrusive charger that doesn’t dominate a wall. The Pulsar Plus is frequently described as “smaller than a toaster.” It’s a strong pick for tidy garage or carport installs where a bulky unit would look out of place. The wider range also scales: choose the Pulsar Max if you want extra weather hardening and voice control, or the higher-power Pulsar variant if you have three-phase supply. Across the family you get the myWallbox app, OCPP 1.6j, dynamic load management, and solar charging, so the smart features are consistent regardless of which model you fit.
What installing a Wallbox involves
A Wallbox is fixed electrical work: a Registered Electrician installs it on a dedicated, RCD/RCBO-protected circuit and issues a Certificate of Compliance on completion. You don’t need a Wallbox-certified specialist; any Registered Electrician can fit one. Most NZ homes are single-phase, where the Pulsar Plus’s 7.4kW is the norm; only a three-phase home chasing 11–22kW needs the higher-power Pulsar variant.
Two things make a Wallbox install a little different from a bulkier charger. First, its compact footprint (roughly toaster-sized) gives your electrician more freedom on mounting position, which is useful in a tight garage or on a carport post. Second, plan the cable run early: the Pulsar Plus ships tethered at 5m with a 7m option, so measure from the mount point to where your car’s port sits before install day rather than discovering the reach is short afterwards. If you have solar, ask the installer to enable Wallbox’s solar charging and dynamic load management during commissioning so the unit can throttle to your available supply from day one.
A straightforward Wallbox install lands in the $1,500–$2,500 all-in range including the unit; the full cost guide explains what pushes it higher: usually a long cable run or a switchboard upgrade in an older home.
Frequently asked questions
Is the NZ Wallbox Pulsar Plus single-phase only?
Yes: the Pulsar Plus is a 7.4kW single-phase charger, which suits the large majority of NZ homes. If your home has three-phase supply and you want up to 22kW, you'd step up to the Pulsar family's higher-power variant rather than the standard Plus. Your electrician can confirm what your switchboard supports.
Is a Wallbox charger weatherproof for an outdoor carport?
The Pulsar Plus is rated IP54, so it handles a sheltered outdoor location such as a carport or garage wall. The newer Pulsar Max is positioned as the more weather- and dust-hardened option for tougher indoor or outdoor spots. Your installer can advise on mounting and protection for your specific location.
How much does a Wallbox charger cost in NZ?
Indicative unit-only pricing is around $1,380–$1,695 for the Pulsar Plus and about $1,995 for the Pulsar Max (incl GST, varies by retailer and promotion, not a quote). Installed packages are sometimes advertised around $2,100. A standard install still falls in the usual $1,500–$2,500 all-in range including the unit.
Will the standard cable reach my parking spot?
The Pulsar Plus ships tethered with a 5m cable, with a 7m option available. Measure the run from where the charger will mount to where your car's charge port sits when parked. If it's tight, ask for the longer cable or discuss mounting position with your electrician before install day.